HVAC (PART2) with Revit MEP & Practical Projects
What you'll learn
Learn how to install a full free version of the Revit software !
Design any HVAC system for any type of buildings.
Design any HVAC shop drawings with the Revit software .
Use the Rivet Software to design the HVAC Ducts system layouts.
Use the Rivet Software to design Thermal loads calculations for any building.
Use the Rivet Software to design the Air terminals system for any building.
Read and Analyze any Revit architectural layout.
Design the chiller system with the Revit software.
Design the chiller controlling valves system with the Revit software.
Learn how to prepare the initial settings of the Revit project.
Learn how to link an architectural Revit project.
Learn how to handle the architectural ceilings and floors to be ready for the HVAC design.
Learn how to control the visibility graphics for any drawing of the building.
Design the piping system required for the chiller , the Air handing unit and the pump.
Learn some tricks and modifications on the ducts system design to overcome any interference in the design.
Create the spaces required for designing the HVAC project layout.
Create the tagging process for the spaces in your HVAC project layout.
Design the required zones inside each floor to distribute the HVAC air system.
Analyze the thermal loads report out of the Revit.
Learn how to work on the different routing preferences for the ducting system.
Learn how to set the different mechanical settings for the ducting system.
Learn how to create the shared parameters required for the tagging process.
Learn how to use the different annotation tools required to complete the air system drawing.
Learn how to put the shop drawing on the final template and to print it.
Learn how to use the different modification commands.
Design the chiller system required to feed the project on the Revit software.
Learn how to make the sizing operation required for the each duct in the system.
Learn how to make the sizing operation required for the each pipe in the system.
Requirements
some HVAC designing basics discussed in part one in our HVAC course
Description
"Heat ventilation and air conditioning (HVAC) is one of the most important system for any building design".
Hello there,
If the word 'HVAC' baffles your mind and you want to master it, then this is for you.
If you want to start your career in HVAC design and make money from it, then is for you.
If you want to learn how to design HVAC system for any Project, then this course is for you.
If you get bored of the word 'this course is for you', then this course is for you.
if you love the mechanical engineering
if your are a mechanical engineering student
Well, HVAC is becoming a widely-used word on everybody's tongue, and this is reasonable as most the building designs must include the heating and ventilation requirements.
So we introduce to you the HEAT VENTILATION & AIR CONDITIONING Design course that you need in order to get your hand on the HVAC design as this course collects most of the knowledge that you'll need in your journey.
We believe that the brain loves to keep the information that it finds applicable, and that's what we're doing here in UNITED ENGINEERING, we give you years of experience from our instructors that have been gathered in just one an interesting dose.
HVAC also is a core branch in the mechanical engineering designing modules
Our course is structured as follows:
Learn how to install a full free version of the Revit software !
Take an overview on the Revit interface.
Learn how to prepare the initial settings of the Revit project.
learn how to link an architectural Revit project.
Learn how to handle the architectural ceilings and floors to be ready for the HVAC design.
Learn how to control the visibility graphics for any drawing of the building.
Design the diffusers system layout on the suspended ceiling.
Design the complete ducts system layout on the floor ceiling.
Learn some tricks and modifications on the ducts system design to overcome any interference in the design .
Create the spaces required for designing the HVAC project layout.
Create the tagging process for the spaces in your HVAC project layout.
make all the required thermal loads calculations with the Revit software.
design the required zones inside each floor to distribute the HVAC air system.
Analyze the thermal loads report out of the Revit.
Learn how to work on the different routing preferences for the ducting system.
Learn how to set the different mechanical settings for the ducting system.
Learn how to create the shared parameters required for the tagging process.
Learn how to use the different annotation tools required to complete the air system drawing.
Learn how to put the shop drawing on the final template and to print it.
Design the chiller system required to feed the project on the Revit software.
Design the piping system required for the chiller , the Air handing unit and the pump.
Learn how to make the sizing operation required for the each duct in the system.
Learn how to make the sizing operation required for the each pipe in the system.
** At this course :
These tracks would be like a piece of cake to you.
We'll take you from the Scratch of Designing and Analysis.
You'll learn with practical exciting method in order to understand without being bored.
All you need is an open mind and the passion to be successful!
** Our help in YouCan is always available to you if you get stuck or have a question - our support is legendary in Udemy
--> So don't hesitate and click " Buy Now " button so you can begin on the right path!
Who this course is for:
Mechanical engineers
Mechanical engineering students
HVAC designers
Fluid mechanics students
Heat Ventilation and Air Conditioning students
Anyone who need to construct his HVAC project
Energy engineers
HAP designing students
Revit MEP students
Autocad mechanical students
Plumbing students
Piping students
Revit MEP designers
Engineers
interior Designers
technicians
Genre: eLearning | MP4 | Video: h264, 1280x720 | Audio: aac, 44100 Hz
Language: English | VTT | Size: 3.8 GB | Duration: 8 hours
Download
http://s9.alxa.net/0abc1/a00cv/HVAC....l.Projects.rar
HVAC (PART2) with Revit MEP & Practical Projects
What you'll learn
Learn how to install a full free version of the Revit software !
Design any HVAC system for any type of buildings.
Design any HVAC shop drawings with the Revit software .
Use the Rivet Software to design the HVAC Ducts system layouts.
Use the Rivet Software to design Thermal loads calculations for any building.
Use the Rivet Software to design the Air terminals system for any building.
Read and Analyze any Revit architectural layout.
Design the chiller system with the Revit software.
Design the chiller controlling valves system with the Revit software.
Learn how to prepare the initial settings of the Revit project.
Learn how to link an architectural Revit project.
Learn how to handle the architectural ceilings and floors to be ready for the HVAC design.
Learn how to control the visibility graphics for any drawing of the building.
Design the piping system required for the chiller , the Air handing unit and the pump.
Learn some tricks and modifications on the ducts system design to overcome any interference in the design.
Create the spaces required for designing the HVAC project layout.
Create the tagging process for the spaces in your HVAC project layout.
Design the required zones inside each floor to distribute the HVAC air system.
Analyze the thermal loads report out of the Revit.
Learn how to work on the different routing preferences for the ducting system.
Learn how to set the different mechanical settings for the ducting system.
Learn how to create the shared parameters required for the tagging process.
Learn how to use the different annotation tools required to complete the air system drawing.
Learn how to put the shop drawing on the final template and to print it.
Learn how to use the different modification commands.
Design the chiller system required to feed the project on the Revit software.
Learn how to make the sizing operation required for the each duct in the system.
Learn how to make the sizing operation required for the each pipe in the system.
Requirements
some HVAC designing basics discussed in part one in our HVAC course
Description
"Heat ventilation and air conditioning (HVAC) is one of the most important system for any building design".
Hello there,
If the word 'HVAC' baffles your mind and you want to master it, then this is for you.
If you want to start your career in HVAC design and make money from it, then is for you.
If you want to learn how to design HVAC system for any Project, then this course is for you.
If you get bored of the word 'this course is for you', then this course is for you.
if you love the mechanical engineering
if your are a mechanical engineering student
Well, HVAC is becoming a widely-used word on everybody's tongue, and this is reasonable as most the building designs must include the heating and ventilation requirements.
So we introduce to you the HEAT VENTILATION & AIR CONDITIONING Design course that you need in order to get your hand on the HVAC design as this course collects most of the knowledge that you'll need in your journey.
We believe that the brain loves to keep the information that it finds applicable, and that's what we're doing here in UNITED ENGINEERING, we give you years of experience from our instructors that have been gathered in just one an interesting dose.
HVAC also is a core branch in the mechanical engineering designing modules
Our course is structured as follows:
Learn how to install a full free version of the Revit software !
Take an overview on the Revit interface.
Learn how to prepare the initial settings of the Revit project.
learn how to link an architectural Revit project.
Learn how to handle the architectural ceilings and floors to be ready for the HVAC design.
Learn how to control the visibility graphics for any drawing of the building.
Design the diffusers system layout on the suspended ceiling.
Design the complete ducts system layout on the floor ceiling.
Learn some tricks and modifications on the ducts system design to overcome any interference in the design .
Create the spaces required for designing the HVAC project layout.
Create the tagging process for the spaces in your HVAC project layout.
make all the required thermal loads calculations with the Revit software.
design the required zones inside each floor to distribute the HVAC air system.
Analyze the thermal loads report out of the Revit.
Learn how to work on the different routing preferences for the ducting system.
Learn how to set the different mechanical settings for the ducting system.
Learn how to create the shared parameters required for the tagging process.
Learn how to use the different annotation tools required to complete the air system drawing.
Learn how to put the shop drawing on the final template and to print it.
Design the chiller system required to feed the project on the Revit software.
Design the piping system required for the chiller , the Air handing unit and the pump.
Learn how to make the sizing operation required for the each duct in the system.
Learn how to make the sizing operation required for the each pipe in the system.
** At this course :
These tracks would be like a piece of cake to you.
We'll take you from the Scratch of Designing and Analysis.
You'll learn with practical exciting method in order to understand without being bored.
All you need is an open mind and the passion to be successful!
** Our help in YouCan is always available to you if you get stuck or have a question - our support is legendary in Udemy
--> So don't hesitate and click " Buy Now " button so you can begin on the right path!
Who this course is for:
Mechanical engineers
Mechanical engineering students
HVAC designers
Fluid mechanics students
Heat Ventilation and Air Conditioning students
Anyone who need to construct his HVAC project
Energy engineers
HAP designing students
Revit MEP students
Autocad mechanical students
Plumbing students
Piping students
Revit MEP designers
Engineers
interior Designers
technicians
Genre: eLearning | MP4 | Video: h264, 1280x720 | Audio: aac, 44100 Hz
Language: English | VTT | Size: 3.8 GB | Duration: 8 hours
Download
http://s9.alxa.net/0abc1/a00cv/HVAC....l.Projects.rar