Oasys adsec win32 8.2.1.63
AdSec Benefits
Accurately predicts important details for reinforced concrete cross sections
Speeds up calculations for complex cross sectional shapes
Analyse using Eurocodes and other International standards
About This Software
The leading analysis program for sections under load
AdSec’s analysis helps design all kinds of sections under load. Working from first principles, software can handle sections made from concrete, steel or fibre-reinforced polymer (FRP) sections, or any combinations of these materials.
Analyse sections under load to international codes
AdSec is ideal for tasks such as analysing a bridge beam for cracking under load, designing a composite mega column, checking a pre-stressed floor or finding the capacity of a pile. AdSec is also invaluable for refurbishment projects, enabling engineers to calculate the capacity of existing beams and columns, then telling them how much improvement they can achieve from bonded carbon fibre plates and other improvements. For uniaxial and biaxial conditions, the software gives analysis options for serviceability and ultimate limit states to national and international design codes.
AdSec offers convenient tools for generating irregular sections and uses simplified parametric input of geometry and reinforcement layout for regularly shaped column and beam sections. Tools then allow users to assemble these into more complex (compound) sections.
Engineers use AdSec to analyse axial loads and bending moments, and to prestress loads using bonded and unbonded tendons. Creep, differential shrinkage and temperature effects can be investigated using applied strains. And users can combine long-term dead loads with short-term imposed loads and derive forces and moments from strains and curvatures.
Used by engineers around the world, AdSec is the leading analysis program for sections under load.
Features
Design Codes:
ACI 318-02 & ACI 318M-02
ACI 318-05 & ACI 318M-05
ACI 318-08
AS3600-2001
BS5400 including IAN70/06
BS8110:1985, BS8110:1997 & BS8110:1997 including the 2007 amendment
Eurocode 2 (EN 1992-1-1:2004) including the national annexes for
Denmark
France
Germany
Italy
Netherlands
United Kingdom
Hong Kong Code of Practice 1987 and 2004 including AMD1 2007
Hong Kong Structures Design Manual 2002
IS 456 : 2000
Section:
Section Builder
Rectangle
Circular
I section
Tee & inverted tee
Channel
Angle
Taper
Elliptical
General I section
Tapered tee
Tapered angle
Taper I section
Recto-circular
Recto-ellipse
Secant pile
Perimeter
DXF import
Explicit definition
Bridge beam library
Section Generation Wizards
Concrete Sections with Steel Reinforcement
Explicitly placed bars plus template reinforcement patterns for the following sections:
Rectangle
Circular
Tee & inverted tee
Tapered tee
I section
General I section
Taper
Channel
Angle
Elliptical
Recto-circular
Steel Structural Sections
FRP Sections & Reinforcement
Compound Sections and Tools
Explicit Material Curves
Ultimate Limit State
ULS Capacity Analysis
Stresses and strains from the ultimate applied loads and stresses
Ultimate resistance N/M (P/M) interaction Chart
Ultimate resistance Myy / Mzz moment interaction chart
Serviceability Limit State
Cracking moment calculation
Stresses, stiffness and crack widths
Moment Stiffness & Moment Curvature Charts
Download
*
Medicine rar Password:1234
AdSec Benefits
Accurately predicts important details for reinforced concrete cross sections
Speeds up calculations for complex cross sectional shapes
Analyse using Eurocodes and other International standards
About This Software
The leading analysis program for sections under load
AdSec’s analysis helps design all kinds of sections under load. Working from first principles, software can handle sections made from concrete, steel or fibre-reinforced polymer (FRP) sections, or any combinations of these materials.
Analyse sections under load to international codes
AdSec is ideal for tasks such as analysing a bridge beam for cracking under load, designing a composite mega column, checking a pre-stressed floor or finding the capacity of a pile. AdSec is also invaluable for refurbishment projects, enabling engineers to calculate the capacity of existing beams and columns, then telling them how much improvement they can achieve from bonded carbon fibre plates and other improvements. For uniaxial and biaxial conditions, the software gives analysis options for serviceability and ultimate limit states to national and international design codes.
AdSec offers convenient tools for generating irregular sections and uses simplified parametric input of geometry and reinforcement layout for regularly shaped column and beam sections. Tools then allow users to assemble these into more complex (compound) sections.
Engineers use AdSec to analyse axial loads and bending moments, and to prestress loads using bonded and unbonded tendons. Creep, differential shrinkage and temperature effects can be investigated using applied strains. And users can combine long-term dead loads with short-term imposed loads and derive forces and moments from strains and curvatures.
Used by engineers around the world, AdSec is the leading analysis program for sections under load.
Features
Design Codes:
ACI 318-02 & ACI 318M-02
ACI 318-05 & ACI 318M-05
ACI 318-08
AS3600-2001
BS5400 including IAN70/06
BS8110:1985, BS8110:1997 & BS8110:1997 including the 2007 amendment
Eurocode 2 (EN 1992-1-1:2004) including the national annexes for
Denmark
France
Germany
Italy
Netherlands
United Kingdom
Hong Kong Code of Practice 1987 and 2004 including AMD1 2007
Hong Kong Structures Design Manual 2002
IS 456 : 2000
Section:
Section Builder
Rectangle
Circular
I section
Tee & inverted tee
Channel
Angle
Taper
Elliptical
General I section
Tapered tee
Tapered angle
Taper I section
Recto-circular
Recto-ellipse
Secant pile
Perimeter
DXF import
Explicit definition
Bridge beam library
Section Generation Wizards
Concrete Sections with Steel Reinforcement
Explicitly placed bars plus template reinforcement patterns for the following sections:
Rectangle
Circular
Tee & inverted tee
Tapered tee
I section
General I section
Taper
Channel
Angle
Elliptical
Recto-circular
Steel Structural Sections
FRP Sections & Reinforcement
Compound Sections and Tools
Explicit Material Curves
Ultimate Limit State
ULS Capacity Analysis
Stresses and strains from the ultimate applied loads and stresses
Ultimate resistance N/M (P/M) interaction Chart
Ultimate resistance Myy / Mzz moment interaction chart
Serviceability Limit State
Cracking moment calculation
Stresses, stiffness and crack widths
Moment Stiffness & Moment Curvature Charts
Download
*
Medicine rar Password:1234
