Lectra Modaris V8R1 (2018) Expet License + Diamino Fashion V6R2
Lectra Modaris V8R1 offers new time-saving opportunities to apparel designers and graders and significantly improves the productivity of the design department.
With Modaris V8R1, you benefit from the following advantages:
– New advanced design tools
– Improved virtual pleat printing (only in Modaris Expert)
– New tool for refining logos and non-repetitive patterns in 2D
– Improved 2D/3D/2D integration for logos and non-repetitive patterns (only in Modaris 3D and Expert 3D)
– More comprehensive and effective industrialization tools
– New grading tools
– More reliable advanced grading
– Easier communication
– Ergonomic improvements
– Visualization and/or control tool improvements
– Improved virtual assembly (only in Modaris 3D and Modaris Expert 3D)
– New 3D fabric selector (only in Modaris 3D and Modaris Expert 3D)
– New assembly method by layer (only in Modaris 3D and Modaris Expert 3D)
– Improved 3D simulation (only in Modaris 3D and Modaris Expert 3D)
– Closer management of 3D mesh resolution (only in Modaris 3D and Modaris Expert 3D)
– New 3D shoulder pad management tool (only in Modaris 3D and Modaris Expert 3D)
– New management of 3D visuals both within and outside of virtual prototyping (only in Modaris 3D and Modaris Expert 3D)
– Fabric content (only in Modaris 3D and Modaris Expert 3D)
– Standard Alvanon mannequins (only in Modaris 3D and Modaris Expert 3D, and under specific licenses)
1 NEW ADVANCED CREATION/DESIGN TOOLS
1.1 Creating developed points in sequence
1.2 Creating a slanted line
1.3 Creating a circle (only in Modaris Expert)
2 IMPROVED VIRTUAL PLEAT MANAGEMENT (ONLY IN MODARIS EXPERT)
2.1 Visualizing fold lines and number of pleats.
2.2 Visualizing fold direction
2.3 Adding comments to virtual pleats
2.4 Smoothing of unsewn side of pleat lines
2.5 Improved management of virtual pleat plotting
3 NEW TOOLS FOR REFINING LOGOS AND NON-REPETITIVE PATTERNS
3.1 Adding and adjusting patterns and logos on the patterns
3.2 Grading logos and patterns
Manual grading
Parametric grading (only in Modaris Expert)
3.3 Management of logos and patterns 2D-3D-2D (only in Modaris 3D and Modaris Expert 3D)
Print/Plot
4 NEW INDUSTRIALIZATION TOOLS
4.1 Adding notches to corners
4.2 Replacing one or more corners of a model
4.3 Backup of all corners of a model
5 IMPROVED GRADING
5.1 Extended grading management
5.2 Grading in parallel
5.3 Improved management of size system modification
6 NEW PRE-PRODUCTION CONTROL TOOLS
6.1 Controlling the deletion of master lines in dependent constructions
6.2 Visualizing the dependency chain
6.3 Controlling the consistency of extended grading
7 EASIER COMMUNICATION
7.1 Exporting to the format for versions prior to Modaris V8
7.2 Importing Modaris PGS
7.3 Exporting to DXF-AAMA and DXF-ASTM standard formats
7.4 Exporting in bulk
8 ERGONOMIC IMPROVEMENTS
8.1 Color configurator and completion lists
Desktop colors
Completion lists
8.2 Thumbwheel zoom
8.3 Decimal configuration
9 NEW ASSEMBLY TOOLS FOR CREATING YOUR 3D PROTOTYPES (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
9.2 Variant property for pieces to stitch
9.3 Component variant
9.4 Capitalizing on existing assemblies
9.5 Ergonomic improvement of 3D assembly
New creation process for pieces to stitch
New colors for layers
New colors for facings
Copying/pasting an assembly
10 NEW MATERIAL SELECTOR (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
10.1 Selection from fabric libraries
10.2 Multiple criteria selection
11 FASTER AND MORE REALISTIC 3D SIMULATION (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
11.1 New method for positioning the 3D prototype
11.2 Mesh resolution management
11.3 Refining shoulder pads
11.4 Improvement in change of size and posture after simulation
11.5 Improved multiple garment simulation
11.6 New automated simulation tool for 3D grading
12 IMPROVED MANAGEMENT OF 3D VISUALS (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
12.1 Face/reverse visual management
12.2 Simulation of multiple thicknesses
13 ADDITIONAL INDUSTRY-SPECIFIC CONTENT RELATED TO FABRIC AND MANNEQUINS (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
13.1 Standard 3D mannequin libraries from Alvanon
13.2 Additional fabrics
13.3 Usage rights for industry-specific data libraries
14 NEW ILLUSTRATIVE CONTENT
Lectra's Diamino Fashion allows you to create tracings in a simple and fast way for all kinds of garments and fabrics,
taking into account different proposals such as: optimizing the precision in tissue consumption and extending the productivity of the interactive and / or automatic drawing process.
Benefits:
· Calculate the consumption of the fabric in the development of the product to obtain the maximum use of the material.
· Working collaboratively on fabrics and patterns in the design and manufacturing processes, improving productivity.
· Multicore and automated trace processing to produce more in less time.
· Make the investment profitable in a few months.
Download
*
Key password: lectrav8r1sp8sp12gerberv9.0
Its full working software on win7 & win10 x64.
Lectra Modaris V8R1 offers new time-saving opportunities to apparel designers and graders and significantly improves the productivity of the design department.
With Modaris V8R1, you benefit from the following advantages:
– New advanced design tools
– Improved virtual pleat printing (only in Modaris Expert)
– New tool for refining logos and non-repetitive patterns in 2D
– Improved 2D/3D/2D integration for logos and non-repetitive patterns (only in Modaris 3D and Expert 3D)
– More comprehensive and effective industrialization tools
– New grading tools
– More reliable advanced grading
– Easier communication
– Ergonomic improvements
– Visualization and/or control tool improvements
– Improved virtual assembly (only in Modaris 3D and Modaris Expert 3D)
– New 3D fabric selector (only in Modaris 3D and Modaris Expert 3D)
– New assembly method by layer (only in Modaris 3D and Modaris Expert 3D)
– Improved 3D simulation (only in Modaris 3D and Modaris Expert 3D)
– Closer management of 3D mesh resolution (only in Modaris 3D and Modaris Expert 3D)
– New 3D shoulder pad management tool (only in Modaris 3D and Modaris Expert 3D)
– New management of 3D visuals both within and outside of virtual prototyping (only in Modaris 3D and Modaris Expert 3D)
– Fabric content (only in Modaris 3D and Modaris Expert 3D)
– Standard Alvanon mannequins (only in Modaris 3D and Modaris Expert 3D, and under specific licenses)
1 NEW ADVANCED CREATION/DESIGN TOOLS
1.1 Creating developed points in sequence
1.2 Creating a slanted line
1.3 Creating a circle (only in Modaris Expert)
2 IMPROVED VIRTUAL PLEAT MANAGEMENT (ONLY IN MODARIS EXPERT)
2.1 Visualizing fold lines and number of pleats.
2.2 Visualizing fold direction
2.3 Adding comments to virtual pleats
2.4 Smoothing of unsewn side of pleat lines
2.5 Improved management of virtual pleat plotting
3 NEW TOOLS FOR REFINING LOGOS AND NON-REPETITIVE PATTERNS
3.1 Adding and adjusting patterns and logos on the patterns
3.2 Grading logos and patterns
Manual grading
Parametric grading (only in Modaris Expert)
3.3 Management of logos and patterns 2D-3D-2D (only in Modaris 3D and Modaris Expert 3D)
Print/Plot
4 NEW INDUSTRIALIZATION TOOLS
4.1 Adding notches to corners
4.2 Replacing one or more corners of a model
4.3 Backup of all corners of a model
5 IMPROVED GRADING
5.1 Extended grading management
5.2 Grading in parallel
5.3 Improved management of size system modification
6 NEW PRE-PRODUCTION CONTROL TOOLS
6.1 Controlling the deletion of master lines in dependent constructions
6.2 Visualizing the dependency chain
6.3 Controlling the consistency of extended grading
7 EASIER COMMUNICATION
7.1 Exporting to the format for versions prior to Modaris V8
7.2 Importing Modaris PGS
7.3 Exporting to DXF-AAMA and DXF-ASTM standard formats
7.4 Exporting in bulk
8 ERGONOMIC IMPROVEMENTS
8.1 Color configurator and completion lists
Desktop colors
Completion lists
8.2 Thumbwheel zoom
8.3 Decimal configuration
9 NEW ASSEMBLY TOOLS FOR CREATING YOUR 3D PROTOTYPES (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
9.2 Variant property for pieces to stitch
9.3 Component variant
9.4 Capitalizing on existing assemblies
9.5 Ergonomic improvement of 3D assembly
New creation process for pieces to stitch
New colors for layers
New colors for facings
Copying/pasting an assembly
10 NEW MATERIAL SELECTOR (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
10.1 Selection from fabric libraries
10.2 Multiple criteria selection
11 FASTER AND MORE REALISTIC 3D SIMULATION (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
11.1 New method for positioning the 3D prototype
11.2 Mesh resolution management
11.3 Refining shoulder pads
11.4 Improvement in change of size and posture after simulation
11.5 Improved multiple garment simulation
11.6 New automated simulation tool for 3D grading
12 IMPROVED MANAGEMENT OF 3D VISUALS (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
12.1 Face/reverse visual management
12.2 Simulation of multiple thicknesses
13 ADDITIONAL INDUSTRY-SPECIFIC CONTENT RELATED TO FABRIC AND MANNEQUINS (ONLY IN MODARIS 3D AND MODARIS EXPERT 3D)
13.1 Standard 3D mannequin libraries from Alvanon
13.2 Additional fabrics
13.3 Usage rights for industry-specific data libraries
14 NEW ILLUSTRATIVE CONTENT
Lectra's Diamino Fashion allows you to create tracings in a simple and fast way for all kinds of garments and fabrics,
taking into account different proposals such as: optimizing the precision in tissue consumption and extending the productivity of the interactive and / or automatic drawing process.
Benefits:
· Calculate the consumption of the fabric in the development of the product to obtain the maximum use of the material.
· Working collaboratively on fabrics and patterns in the design and manufacturing processes, improving productivity.
· Multicore and automated trace processing to produce more in less time.
· Make the investment profitable in a few months.
Download
*
Key password: lectrav8r1sp8sp12gerberv9.0
Its full working software on win7 & win10 x64.
