Structural Integrity of Additive Manufactured Materials and Parts
THIS COMPILATION OF Selected Technical Papers, STP1631, Structural Integrity of Additive Manufactured Materials and Parts, contains peer-reviewed papers that were presented at a symposium held October 7-10, 2019, in National Harbor, MD, USA. The symposium was sponsored by ASTM International Additive Manufacturing Center of Excellence and additional ASTM Technical Committees.
Symposium Chairs and STP Editors:
Nima Shamsaei
Auburn University
Auburn, AL, USA
Mohsen Seifi
ASTM International
Washington, DC, USA
TABLE OF CONTENTS
Overview
Demonstration of Closed-Loop Control for Laser Powder Bed Fusion (LPBF)
On the Challenges toward Realization of Functionally Graded Structures by Electron Beam Melting---Fe-Base Shape Memory Alloy and Stainless Steel
Residual Stress Formation in Laser-Based Powder Bed Fusion (PBF-LB) of Invar 36
Origin of Oxides and Oxide-Related Pores in Laser Powder Bed Fusion Parts
Toward Understanding the Role of Surface Texture for Additively Manufactured Metal Parts
Optimizing X-Ray Computed Tomography Settings for Dimensional Metrology Using 2D Image Analysis
Challenges in Inspecting Internal Features for SLM Additive Manufactured Build Artifacts
A Critical Discussion on the Diffraction-Based Experimental Determination of Residual Stress in AM Parts
X-Ray Computed Tomography Inspection in Metal Additive Manufacturing: The Role of Witness Specimens
Perspective on Nondestructive Evaluation of Additive Manufactured Components
Prediction of Residual Stress Evolution for End-To-End Process Chain of Laser Powder Bed Fusion Process and Determination of Fatigue S-N Curves
Design of Coupons and Test Methodology for Orthotropic Characterization of FFF-Processed Ultem 9085
Intrinsic Threshold Stress Intensity of Additive Manufactured Metals
A Multiscale Material Modeling Approach to Predict the Mechanical Properties of Powder Bed Fusion (PBF) Metal
Alternate Method for Determining Yield Strength of Polymer Additive Manufacturing
Effects of Surface Roughness and Porosity on Fatigue Behavior of AlSi10Mg Produced by Laser Powder Bed Fusion Process
Characterization of Functionally Graded Materials Based on Inconel 718 and Stainless Steel 316L Manufactured by DED Process
Fretting Fatigue Characterization in Press-Fit Joints of AM Parts by X-Ray Tomography and Digital Image Correlation
Effect of Microstructure and Internal Defects on the Mechanical Properties of Ti6Al4V Gyroid Lattice Structures for Biomedical Implants
Full-Scale High-Load, Thermal, and Fatigue Testing of Additive Manufactured Powder Bed Fusion Component for Oil Field Applications
Metallic Glass (Zr41Ti14Cu12.5Ni10Be22.5) Honeycomb: A Numerical Study
Preclinical Testing of a Novel, Additive-Manufactured, Three-Dimensional Porous Titanium Structure
Investigation of Microstructure and Mechanical Properties of SLM-Produced Inconel 718 and Hastelloy-X Alloys
Analysis of Data Streams for Qualification and Certification of Inconel 738LC Airfoils Processed through Electron Beam Melting
English | ISBN: 0803177089 | 2020 | 378 pages | PDF | 64 MB
Download
http://s6.alxa.net/one/2022/05/Stru....and.Parts.rar
THIS COMPILATION OF Selected Technical Papers, STP1631, Structural Integrity of Additive Manufactured Materials and Parts, contains peer-reviewed papers that were presented at a symposium held October 7-10, 2019, in National Harbor, MD, USA. The symposium was sponsored by ASTM International Additive Manufacturing Center of Excellence and additional ASTM Technical Committees.
Symposium Chairs and STP Editors:
Nima Shamsaei
Auburn University
Auburn, AL, USA
Mohsen Seifi
ASTM International
Washington, DC, USA
TABLE OF CONTENTS
Overview
Demonstration of Closed-Loop Control for Laser Powder Bed Fusion (LPBF)
On the Challenges toward Realization of Functionally Graded Structures by Electron Beam Melting---Fe-Base Shape Memory Alloy and Stainless Steel
Residual Stress Formation in Laser-Based Powder Bed Fusion (PBF-LB) of Invar 36
Origin of Oxides and Oxide-Related Pores in Laser Powder Bed Fusion Parts
Toward Understanding the Role of Surface Texture for Additively Manufactured Metal Parts
Optimizing X-Ray Computed Tomography Settings for Dimensional Metrology Using 2D Image Analysis
Challenges in Inspecting Internal Features for SLM Additive Manufactured Build Artifacts
A Critical Discussion on the Diffraction-Based Experimental Determination of Residual Stress in AM Parts
X-Ray Computed Tomography Inspection in Metal Additive Manufacturing: The Role of Witness Specimens
Perspective on Nondestructive Evaluation of Additive Manufactured Components
Prediction of Residual Stress Evolution for End-To-End Process Chain of Laser Powder Bed Fusion Process and Determination of Fatigue S-N Curves
Design of Coupons and Test Methodology for Orthotropic Characterization of FFF-Processed Ultem 9085
Intrinsic Threshold Stress Intensity of Additive Manufactured Metals
A Multiscale Material Modeling Approach to Predict the Mechanical Properties of Powder Bed Fusion (PBF) Metal
Alternate Method for Determining Yield Strength of Polymer Additive Manufacturing
Effects of Surface Roughness and Porosity on Fatigue Behavior of AlSi10Mg Produced by Laser Powder Bed Fusion Process
Characterization of Functionally Graded Materials Based on Inconel 718 and Stainless Steel 316L Manufactured by DED Process
Fretting Fatigue Characterization in Press-Fit Joints of AM Parts by X-Ray Tomography and Digital Image Correlation
Effect of Microstructure and Internal Defects on the Mechanical Properties of Ti6Al4V Gyroid Lattice Structures for Biomedical Implants
Full-Scale High-Load, Thermal, and Fatigue Testing of Additive Manufactured Powder Bed Fusion Component for Oil Field Applications
Metallic Glass (Zr41Ti14Cu12.5Ni10Be22.5) Honeycomb: A Numerical Study
Preclinical Testing of a Novel, Additive-Manufactured, Three-Dimensional Porous Titanium Structure
Investigation of Microstructure and Mechanical Properties of SLM-Produced Inconel 718 and Hastelloy-X Alloys
Analysis of Data Streams for Qualification and Certification of Inconel 738LC Airfoils Processed through Electron Beam Melting
English | ISBN: 0803177089 | 2020 | 378 pages | PDF | 64 MB
Download
http://s6.alxa.net/one/2022/05/Stru....and.Parts.rar