Nemetschek FRILO 2023.2 - Online Installer
FRILO Software has successfully delivered version 2023-2.
With this update, the provider of innovative solutions for structural analysis and structural design is launching a new program that enables the calculation of beam models in reinforced concrete construction.
In addition, three solutions are equipped with a modern PLUS interface.
A new interface between SCIA engineers and FRILO expands the possibilities in the design of timber truss nodes.
FRILO version 2023-2 provides civil engineers with a new program,
BSM+, which in its first version enables the creation of optimized stiffness
member models for all reinforced concrete components. In the process,
frames for rectangular structures with free choice of reentrant
corners and recesses are determined. In addition to the classic concentrated
loads, linear and trapezoidal loads can also be defined by the user, namely
the program automatically converts to an equivalent concentrated load.
All member forces can be produced with the resultant horizontal and vertical
load sharing. "Common standard design methods cannot be easily applied
static and geometric discontinuities such as cracks and dents. Consequently
we developed BSM+ for reinforced concrete.
Because we provide structural engineers with a tool for generating simple models of members in reinforced concrete
concrete structures, they no longer have to rely only on their experience
in areas where standard design is not applicable," explains Peter Fritz,
Head of Product Management and Customer Success at FRILO.
Continuous stack with further updates
After the continuous beam DLT+ has already been generally overhauled
Release 2023-1, the most widely used FRILO program has moved on
updates in the current version of the software. For example, the possibility
biaxial design including reinforcement of reinforced concrete beams was
added as an additional option. The calculation is based on one armature
angle placement for ultimate limit state and serviceability limit
condition. In addition, the new version of the program allows users to customize
crack width and select end support limits on a percentage basis. U
In addition, for the nonlinear creep of reinforced concrete beams, it results
the creep index can be increased automatically.
Three programs with new PLUS programs
With cross-section checking steel SQN+, for checking cross-sections of reinforced concrete
Details B2+ and wooden construction HO12+, three central FRILO solutions
are equipped with a modern PLUS interface. SQN+ (formerly
ST7) performs cross-section verification of steel cross-sections in
ultimate limit state. The design was carried out in accordance with Eurocode 3,
while B2+ (successor to B2) can be used to design cross sections for
bending by longitudinal force and for shear force. Furthermore, the width of the crack
and stress checks can be made or the effective stiffness can be
determined. The new PLUS program HO12+ (successor of HO12) is suitable.
for calculation and design of cuts (solid wood and lamp) and
openings (glued) in wooden beams. Internal forces and dimensions
required for checks entered by the user. It is possible to check the absorbing tensile force, residual cross-section and
reinforcement.
Interface between SCIA and FRILO for wood design
Furthermore, the new interface between SCIA and FRILO in wood design has
created. Starting with 3D models in SCIA Engineer, users can in the future
simply select individual grid nodes and transfer them to the FRILO program
HO13+ truss node tree. During transmission, all information about the materials,
cross sections, load combinations and their internal forces already known in
The 3D SCIA model is automatically taken into account. This means that
the data does not have to be re-entered manually in FRILO. This saves
time and reduces sources of error in timber design. In HO13+,
appropriate checks for structural safety of truss nodes can
then it is easily and reliably performed in 2D. "The new interface supports ours
the ambition to use the synergies between SCIA and FRILO solutions. The
workflow brings us one step closer to our goal of making the method structural
engineers work more efficiently and productively," says Markus Gallenberger, Director of both companies.
FRILO also offers powerful user-friendly software solutions
for structural calculations for over 40 years and has become a leader
supplier in this area on the German market. Thanks to the modular system
which underlies the innovative product portfolio, payload
they can be individual components of different designs and material variants
checked separately and accurately. With more than 140 budget programs, it
it is ensured that the available solutions exactly meet the requirements a
the day job of a civil engineer. Since 1999, FRILO, with headquarters in
Stuttgart, was integrated into the Nemetschek Group as an independent company
brand. In 2022, FRILO acquired DC Software and expanded its portfolio to
foundation engineering. Additional information at www.frilo.eu.
FRILO, developed by the Nemetschek Group, is a comprehensive software solution containing innovative calculation software for structural analysis and design. Founded in 1978 in Stuttgart, Germany, FRILO has been part of the Nemetschek Group since 1999. With more than 40 years of experience and around 100 static software solutions, FRILO is one of the best suppliers of the best professional software for analysis and design of facilities, which has met the needs of the general engineer .
FRILO software is widely known for its use, quick results and constant compliance with modern standards. FRILO meets the everyday practical needs of engineers and provides high-quality customer service. This collection offers a wide range of software for modeling, disc and FEM panels, frames, reinforced concrete, steel, wood, buildings and foundations.
Features of FRILO software:
*Analysis and design of structures
*Easy to use
*Fast and accurate results
*In accordance with current standards
*Make a model
*FEM disc
*Reinforced concrete, steel, wood, buildings and foundations
- System required - Hardware:
- Processor, such as Intel Core 2 or equivalent
- Screen resolution 1280 x 1024 or higher
- Available hard disk space > 5 GB
Operating system:
- Windows 7
- Windows 8/8.1
- Windows 10
- Windows 11
(32-bit and 64-bit versions)
Framework:
- Microsoft Windows Framework 4.6.2
Download setup + medicine: http://s19.alxa.net/one/2023/09...O.2023-2.1.rar
FRILO Software has successfully delivered version 2023-2.
With this update, the provider of innovative solutions for structural analysis and structural design is launching a new program that enables the calculation of beam models in reinforced concrete construction.
In addition, three solutions are equipped with a modern PLUS interface.
A new interface between SCIA engineers and FRILO expands the possibilities in the design of timber truss nodes.
FRILO version 2023-2 provides civil engineers with a new program,
BSM+, which in its first version enables the creation of optimized stiffness
member models for all reinforced concrete components. In the process,
frames for rectangular structures with free choice of reentrant
corners and recesses are determined. In addition to the classic concentrated
loads, linear and trapezoidal loads can also be defined by the user, namely
the program automatically converts to an equivalent concentrated load.
All member forces can be produced with the resultant horizontal and vertical
load sharing. "Common standard design methods cannot be easily applied
static and geometric discontinuities such as cracks and dents. Consequently
we developed BSM+ for reinforced concrete.
Because we provide structural engineers with a tool for generating simple models of members in reinforced concrete
concrete structures, they no longer have to rely only on their experience
in areas where standard design is not applicable," explains Peter Fritz,
Head of Product Management and Customer Success at FRILO.
Continuous stack with further updates
After the continuous beam DLT+ has already been generally overhauled
Release 2023-1, the most widely used FRILO program has moved on
updates in the current version of the software. For example, the possibility
biaxial design including reinforcement of reinforced concrete beams was
added as an additional option. The calculation is based on one armature
angle placement for ultimate limit state and serviceability limit
condition. In addition, the new version of the program allows users to customize
crack width and select end support limits on a percentage basis. U
In addition, for the nonlinear creep of reinforced concrete beams, it results
the creep index can be increased automatically.
Three programs with new PLUS programs
With cross-section checking steel SQN+, for checking cross-sections of reinforced concrete
Details B2+ and wooden construction HO12+, three central FRILO solutions
are equipped with a modern PLUS interface. SQN+ (formerly
ST7) performs cross-section verification of steel cross-sections in
ultimate limit state. The design was carried out in accordance with Eurocode 3,
while B2+ (successor to B2) can be used to design cross sections for
bending by longitudinal force and for shear force. Furthermore, the width of the crack
and stress checks can be made or the effective stiffness can be
determined. The new PLUS program HO12+ (successor of HO12) is suitable.
for calculation and design of cuts (solid wood and lamp) and
openings (glued) in wooden beams. Internal forces and dimensions
required for checks entered by the user. It is possible to check the absorbing tensile force, residual cross-section and
reinforcement.
Interface between SCIA and FRILO for wood design
Furthermore, the new interface between SCIA and FRILO in wood design has
created. Starting with 3D models in SCIA Engineer, users can in the future
simply select individual grid nodes and transfer them to the FRILO program
HO13+ truss node tree. During transmission, all information about the materials,
cross sections, load combinations and their internal forces already known in
The 3D SCIA model is automatically taken into account. This means that
the data does not have to be re-entered manually in FRILO. This saves
time and reduces sources of error in timber design. In HO13+,
appropriate checks for structural safety of truss nodes can
then it is easily and reliably performed in 2D. "The new interface supports ours
the ambition to use the synergies between SCIA and FRILO solutions. The
workflow brings us one step closer to our goal of making the method structural
engineers work more efficiently and productively," says Markus Gallenberger, Director of both companies.
FRILO also offers powerful user-friendly software solutions
for structural calculations for over 40 years and has become a leader
supplier in this area on the German market. Thanks to the modular system
which underlies the innovative product portfolio, payload
they can be individual components of different designs and material variants
checked separately and accurately. With more than 140 budget programs, it
it is ensured that the available solutions exactly meet the requirements a
the day job of a civil engineer. Since 1999, FRILO, with headquarters in
Stuttgart, was integrated into the Nemetschek Group as an independent company
brand. In 2022, FRILO acquired DC Software and expanded its portfolio to
foundation engineering. Additional information at www.frilo.eu.
FRILO, developed by the Nemetschek Group, is a comprehensive software solution containing innovative calculation software for structural analysis and design. Founded in 1978 in Stuttgart, Germany, FRILO has been part of the Nemetschek Group since 1999. With more than 40 years of experience and around 100 static software solutions, FRILO is one of the best suppliers of the best professional software for analysis and design of facilities, which has met the needs of the general engineer .
FRILO software is widely known for its use, quick results and constant compliance with modern standards. FRILO meets the everyday practical needs of engineers and provides high-quality customer service. This collection offers a wide range of software for modeling, disc and FEM panels, frames, reinforced concrete, steel, wood, buildings and foundations.
Features of FRILO software:
*Analysis and design of structures
*Easy to use
*Fast and accurate results
*In accordance with current standards
*Make a model
*FEM disc
*Reinforced concrete, steel, wood, buildings and foundations
- System required - Hardware:
- Processor, such as Intel Core 2 or equivalent
- Screen resolution 1280 x 1024 or higher
- Available hard disk space > 5 GB
Operating system:
- Windows 7
- Windows 8/8.1
- Windows 10
- Windows 11
(32-bit and 64-bit versions)
Framework:
- Microsoft Windows Framework 4.6.2
Download setup + medicine: http://s19.alxa.net/one/2023/09...O.2023-2.1.rar
