DLUBAL CRANEWAY v8.32.02 (26/07/2023)
Dlubal Software has released 8.32 version of CRANEWAY. This program expands DLUBAL'S product range by the crane runway girder design. Thanks to the well-known user-friendliness of Dlubal programs, you can carry out even complicated analyses according to EN 1993-6, DIN 4132, and DIN 18800 in an easy and comprehensible way.
The crane runway girder is specified in the CRANEWAY module. Based on the defined loadings, the program creates load cases that are combined in load positions. Each load position results in three load combinations. Each load combination is calculated with three loading levels in order to determine the internal forces for the general stress design, the deformation analysis, or the fatigue design. The internal forces are determined according to the second-order analysis for warping torsion. With these calculated internal forces, CRANEWAY provides the appropriate analyses according to EN 1993-6, DIN 4132, or DIN 18800.
The crane runway girder is specified in the CRANEWAY module. Based on the defined loadings, the program creates load cases that are combined in load positions. Each load position results in three load combinations. Each load combination is calculated with three loading levels in order to determine the internal forces for the general stress design, the deformation analysis, or the fatigue design. The internal forces are determined according to the second-order analysis for warping torsion. With these calculated internal forces, CRANEWAY provides the appropriate analyses according to EN 1993-6, DIN 4132, or DIN 18800.