Revit Mep 2023 Basics (Bim For Contractor) Crash Course

Learn Revit MEP quickly (Modelling & Coordination & Introduction to Sheets) & Mainly Mechanical + Electrical Basics




What you'll learn
You Will Learn the concept of Revit MEP.
You Will Learn how to make Modelling with Revit.
You Will Learn how to make Coordination with Revit.
You Will Learn how to extract sheets from Revit.
You Will Learn how to make Schedules with Revit.
You Will Learn how to make Project Templates with Revit.

Requirements
Mechanical IFC Concept
Construction Concept (it is ok if don't have these experience)
BIM Concept (it is ok if don't have these experience)
Shop Drawings Concept (it is ok if don't have these experience)

Description
Course Main Contents:Introduction Starting New Project MEP Template MEP Modelling MEP Coordination (Coordination with Arch & ST) MEP Coordination (Coordination between MEP Services) MEP Sheets Extraction Schedules (BOQ Extraction) Work-sharing (Central & Local files) Notes:You will have introduction for the steps of the project.

The idea of the course is to learn the Revit basics from the contractor point of view, also to learn the Revit mep in very short time, after the course you will have full technical support.
You will learn how to start new MEP project.

You will learn how link and coordinate with Arch & Structure.
You will learn how to create mechanical template (Additional duct systems-Additional pipe systems-Tags & Dimensions....)
You will learn how to make coordination between MEP Services.
You will learn how to extract sheets from Revit.
You will learn how to extract schedules from Revit.
the version of Revit is 2023 but the course is applicable for any version of Revit.
you will learn how to make HVAC model, Plumbing model and FF model.
you will learn how to make electrical model.
The course implemented on small scale project, but it is applicable for any size of projects, you will learn the steps general for the project.

Overview
Section 1: Introduction

Lecture 1 Introduction

Section 2: Introduction

Lecture 2 Introduction 1 (BIM vs Traditional)

Lecture 3 Introduction 2 (Input & Output)

Lecture 4 Introduction 3 (Project General Steps)

Lecture 5 Revit Interface

Section 3: Create New Project

Lecture 6 Create New Project & Insert Arch and ST Links

Lecture 7 Copy Monitor for Levels & Grids

Lecture 8 Create Floor & Ceiling Views

Section 4: Mechanical Modelling Basics

Lecture 9 Mechanical Modelling Basics 1 (Duct & Pipe Modelling)

Lecture 10 Mechanical Modelling Basics 2 (Duct & Pipe Modelling)

Lecture 11 Visibility Graphics

Lecture 12 Visibility Graphics (Filters)

Section 5: Project Template & View Template

Lecture 13 Project Template & View Template Introduction

Lecture 14 Project Template (Pipe Systems & Duct Systems)

Lecture 15 Project Template (Pipe types & Project units)

Lecture 16 Project Template (Tags & dimensions)

Section 6: MEP Modelling

Lecture 17 Modelling Preparation (Insert CAD)

Lecture 18 Modelling Preparation (Load Families)

Lecture 19 HVAC Modelling 1

Lecture 20 HVAC Modelling 2

Lecture 21 HVAC Modelling 3

Lecture 22 Water Supply Modelling 1

Lecture 23 Water Supply Modelling 2

Lecture 24 Schedules

Lecture 25 Drainage Modelling 1

Lecture 26 Drainage Modelling 2

Lecture 27 Drainage Modelling 3

Lecture 28 Drainage Modelling 4

Lecture 29 Firefighting Modelling

Lecture 30 Electrical Template

Lecture 31 Electrical Modelling

Section 7: Coordination & Clash Detection

Lecture 32 Coordination & Clash Detection 1

Lecture 33 Coordination & Clash Detection 2

Section 8: Views & Sheets Preparation

Lecture 34 View Template

Lecture 35 Scope Boxes-Duplicate Views-Match line

Lecture 36 Tags-Dimensions

Lecture 37 Sheet Creation-Callout-Sections-Legend-Exporting Sheet

Mechanical Students,Mechanical Engineers,Mechanical BIM Engineers


Published 5/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 3.68 GB | Duration: 4h 55m

Download
http://s19.alxa.net/one/2023/12/Rev...ash.Course.rar