Maplesoft MapleSim 2024.1 Win/Linux/Mac
The Team Maplesoft is pleased to announce the availability of MapleSim 2024.1. The new release includes tools to easily perform the simulation of multiple design iterations, adds support for the latest version of Modelica Standard Library, and provides additional components to make it faster to build models.
Rapidly Tune Parameters and Explore Design Concepts
– Save time when running iterations of your simulations. The new Rerun panel allows you to significantly cut the time between simulations by skipping the formulation steps when there are no structural changes made to the model.
– Narrow down your design decisions by quickly applying different parameter values, initial conditions, and even simulation settings between runs.
– It’s even simpler to add Maple worksheets for deeper analysis. The new Scripting button lets you add Maple worksheets and organize them for use alongside your MapleSim results.
Expand Your Modeling Capabilities
– Leverage the latest Modelica feature set. You can now import Modelica libraries that make use of MSL 4.0.0 features and select from a variety of new components added to the MapleSim standard libraries (including electrical, 1-D mechanical, signal blocks, and more).
– New Hydraulics components for defining flow restrictions. Additional Restrictions components (Discretized Pipe, Pipe Bend, Elbow Bend, Change) assist with modeling hydraulic flow through bends, contractions, or enlargements.
Updates to the MapleSim Web Handling Library
The MapleSim Web Handling Library, an add-on to MapleSim, brings additional features to better simulate your roll-to-roll processes. Using the new 2024 update you can:
– Fine tune the modeling of heavier webs. You can now choose to add the effect of machine direction web inertia on the web line.
– Apply more control over the web line setup. Using the new Start at Equilibrium setting, you can simplify the setup by starting the simulation in a nonzero tension equilibrium state.
– Add flexibility when modeling nip rollers. The Switching Nip Roller component lets you model web lines where the web contact arc changes from one roller to another.
– Model the winding of multiple rolls on the same drum. New Wind Drum components support 2,3, and 4 webs being wound at once.
MapleSim is the advanced system-level modeling solution based on the Maple mathematical engine and analysis environment to design and simulate multidomain systems, plants and controls in one single environment. The schematic diagram interface enables rapid model development, thanks to the Maple symbolic computation foundation providing a highly concise, numerically efficient model formulation. MapleSim enables Engineering System Designers to answer the most critical questions faced in the everyday activity “Will the system work as required?”, and “Can we make it work better?”, by developing virtual prototypes of multi-domain dynamic systems and performing functional validation, critical system-level parametric studies and optimizations. The Control System Developer will be able to leverage MapleSim to develop high-fidelity models of complex dynamic systems for plant characterization and integrating models through automated code generation into (typically) MATLAB/Simulink for controller development.
Waterloo Maple Inc. is a Canadian software company, headquartered in Waterloo, Ontario. Maplesoft has provided mathematics-based software solutions to educators, engineers, and researchers in science, technology, engineering, and mathematics (STEM) for over 35 years. It is best known as the manufacturer of the Maple computer algebra system, and MapleSim physical modeling and simulation software.
Owner: Waterloo Maple Inc.
Product Name: MapleSim
Version: 2024.1 (1828976)
Supported Architectures: x64
Languages Supported: multilanguage *
System Requirements: Windows, Linux & macOs *
Software Prerequisites: pre-installed Maplesoft Maple 2024.1
Languages Supported: English, 中文 (traditional and simplified), 日本語, Danish,
Español, Français, Ελληνικά, 한국어, Magyar, Português, Русский,
Maplesoft MapleSim 2024.1 | 2.7 Gb
Download
Win
*
Mac
*
Linux
*
The Team Maplesoft is pleased to announce the availability of MapleSim 2024.1. The new release includes tools to easily perform the simulation of multiple design iterations, adds support for the latest version of Modelica Standard Library, and provides additional components to make it faster to build models.
Rapidly Tune Parameters and Explore Design Concepts
– Save time when running iterations of your simulations. The new Rerun panel allows you to significantly cut the time between simulations by skipping the formulation steps when there are no structural changes made to the model.
– Narrow down your design decisions by quickly applying different parameter values, initial conditions, and even simulation settings between runs.
– It’s even simpler to add Maple worksheets for deeper analysis. The new Scripting button lets you add Maple worksheets and organize them for use alongside your MapleSim results.
Expand Your Modeling Capabilities
– Leverage the latest Modelica feature set. You can now import Modelica libraries that make use of MSL 4.0.0 features and select from a variety of new components added to the MapleSim standard libraries (including electrical, 1-D mechanical, signal blocks, and more).
– New Hydraulics components for defining flow restrictions. Additional Restrictions components (Discretized Pipe, Pipe Bend, Elbow Bend, Change) assist with modeling hydraulic flow through bends, contractions, or enlargements.
Updates to the MapleSim Web Handling Library
The MapleSim Web Handling Library, an add-on to MapleSim, brings additional features to better simulate your roll-to-roll processes. Using the new 2024 update you can:
– Fine tune the modeling of heavier webs. You can now choose to add the effect of machine direction web inertia on the web line.
– Apply more control over the web line setup. Using the new Start at Equilibrium setting, you can simplify the setup by starting the simulation in a nonzero tension equilibrium state.
– Add flexibility when modeling nip rollers. The Switching Nip Roller component lets you model web lines where the web contact arc changes from one roller to another.
– Model the winding of multiple rolls on the same drum. New Wind Drum components support 2,3, and 4 webs being wound at once.
MapleSim is the advanced system-level modeling solution based on the Maple mathematical engine and analysis environment to design and simulate multidomain systems, plants and controls in one single environment. The schematic diagram interface enables rapid model development, thanks to the Maple symbolic computation foundation providing a highly concise, numerically efficient model formulation. MapleSim enables Engineering System Designers to answer the most critical questions faced in the everyday activity “Will the system work as required?”, and “Can we make it work better?”, by developing virtual prototypes of multi-domain dynamic systems and performing functional validation, critical system-level parametric studies and optimizations. The Control System Developer will be able to leverage MapleSim to develop high-fidelity models of complex dynamic systems for plant characterization and integrating models through automated code generation into (typically) MATLAB/Simulink for controller development.
Waterloo Maple Inc. is a Canadian software company, headquartered in Waterloo, Ontario. Maplesoft has provided mathematics-based software solutions to educators, engineers, and researchers in science, technology, engineering, and mathematics (STEM) for over 35 years. It is best known as the manufacturer of the Maple computer algebra system, and MapleSim physical modeling and simulation software.
Owner: Waterloo Maple Inc.
Product Name: MapleSim
Version: 2024.1 (1828976)
Supported Architectures: x64
Languages Supported: multilanguage *
System Requirements: Windows, Linux & macOs *
Software Prerequisites: pre-installed Maplesoft Maple 2024.1
Languages Supported: English, 中文 (traditional and simplified), 日本語, Danish,
Español, Français, Ελληνικά, 한국어, Magyar, Português, Русский,
Maplesoft MapleSim 2024.1 | 2.7 Gb
Download
Win
*
Mac
*
Linux
*